超聲波通過式高壓噴淋清洗線

超聲波清洗線,北京正盛鴻成電子科技有限公司是一家集技術研發、設備制造、產品加工、技術培訓為一體的先進工藝設備制造商,有超聲波清洗線,光纖打標機,PCB蝕刻設備,化學蝕刻設備,標牌蝕刻機,高壓噴淋清洗線

超聲波通過式發動機總成、閥體高壓噴淋清洗線

Ultrasonic through type engine assembly, valve body high pressure spray cleaning line

    產品功能:由超聲波清洗系統、高壓噴淋系統和熱風烘干系統組成，清洗液多級過濾裝置，磁力排屑、平網式過濾機及袋式過濾裝置，使清洗液持續保持高清潔度，工件清洗精度高，并能持久穩定。

Product function: it is composed of ultrasonic cleaning system, high-pressure spray system and hot air drying system, multi-stage filter device, magnetic chip removal device, flat screen filter and bag filter device, so that the cleaning solution can keep high-definition cleanliness, the workpiece cleaning precision is high, and it can be stable for a long time.

    產品特點：

l 除上下料外，可自動連續完成整個清洗工藝過程

l 采用輥道輸送模式，工件架在輥道上回轉運行

l 各工位同步定位清洗干燥，設置專門噴嘴清洗吹干特殊要求的接線口及盲孔

l 每個工位之間有氣動密封門隔離，防止清漂洗工位間相互干擾

l 低壓和高壓噴淋系統，清洗及漂洗為獨立循環系統，儲水箱為兩個獨立的箱體，清洗和漂洗工作時循環水分別回流到各自儲液箱內

l 清漂洗液分別由電加熱器加熱，采用PID數顯溫控表控制，工藝溫度可分別自行設定，自動恒溫。油水分離與多級循環過濾系統

l 采用熱風循環烘干系統，熱風恒溫控制，可設定烘干所需溫度

l 整機運行及邏輯互鎖由PLC控制，采用觸摸屏監控及控制操作

l 無級變速加電子調速傳動系統，讓設備操作更方便，隨時可根據需要改變工件傳輸速度

l 全封閉設計，完整的抽風系統，清洗環境潔凈。

l 適合發動機總成、閥體、變速器等大中型零件的內外表面和小孔的清洗，生產效率高，適于批量生產。

Product features:

    In addition to loading and unloading, the whole cleaning process can be completed automatically and continuously

The roller conveying mode is adopted, and the workpiece rack rotates on the roller table

Each working position shall be cleaned and dried synchronously, and special nozzles shall be set to clean and dry the wiring ports and blind holes with special requirements

    There is a pneumatic sealing door between each station to prevent mutual interference between cleaning and rinsing stations

Low pressure and high pressure spray system, cleaning and rinsing are independent circulation system, and the water storage tank is two independent boxes. During cleaning and rinsing, the circulating water flows back to the respective liquid storage tanks

    The cleaning and rinsing solution is heated by electric heater and controlled by PID digital temperature control meter. The process temperature can be set independently and automatically. Oil water separation and multistage circulating filtration system

    The hot air circulation drying system and hot air constant temperature control are adopted to set the required drying temperature

    The operation and logic interlock of the whole machine are controlled by PLC and monitored and controlled by touch screen

    The stepless speed change and electronic speed control drive system make the operation of the equipment more convenient, and the workpiece transmission speed can be changed at any time according to the needs

    Full closed design, complete ventilation system, clean cleaning environment.

    It is suitable for cleaning internal and external surfaces and small holes of large and medium-sized parts such as engine assembly, valve body and transmission, with high production efficiency and suitable for mass production.